A meta-analysis of heavy metals pollution in farmland and urban soils in China over the past 20 years

A total of 713 research papers about field monitor experiments of heavy metals in farmland and urban soils in China, published from 2000 to 2019, were obtained. A meta-analysis was conducted to evaluate the level of China's heavy metal pollution in soils, mainly focusing on eight heavy metals. It was found that the average concentrations of cadmium (Cd), lead (Pb), zinc (Zn), copper (Cu), mercury (Hg), chromium (Cr), nickel (Ni), and arsenic (As) in China were 0.19, 30.74, 85.86, 25.81, 0.074, 67.37, 27.77 and 8.89 mg/kg, respectively. Compared with the background value (0.097 mg/kg), the Cd content showed a twofold (0.19 mg/kg) rise in farmland soils and a threefold (0.29 mg/kg) rise in urban soils. The decreasing order of the mean I_geo was Cd (1.77) > Pb (0.62) > Zn (0.60) > Cu (0.58) > Hg (0.57) > Cr (0.54) > Ni (0.47) > As (0.28). Nearly 33.54% and 44.65% of sites in farmland and urban soils were polluted with Cd. The average concentrations of eight heavy metals were not sensitive change in recent two decades in farmland and urban soils. The average P_n values for urban (2.52) and farmland (2.15) soils showed that heavy metal pollution in urban soils was more serious than that in farmland, and the middle Yangtze River regions, where industrial activity dominates, were the most polluted. The meta-analysis comprehensively evaluated the current pollution situation of soil heavy metal, and provided important basis for soil management and environment prevention in China.     

Comparing dark- and photo-Fenton-like degradation of emerging pollutant over photo-switchable Bi2WO6/CuFe2O4: Investigation on dominant reactive oxidation species

The extensive use of tetracycline hydrochloride (TCH) poses a threat to human health and the aquatic environment. Here, magnetic p-n Bi₂WO₆/CuFe₂O₄ catalyst was fabricated to efficiently remove TCH. The obtained Bi₂WO₆/CuFe₂O₄ exhibited 92.1% TCH degradation efficiency and 50.7% and 35.1% mineralization performance for TCH and raw secondary effluent from a wastewater treatment plant in a photo-Fenton-like system, respectively. The remarkable performance was attributed to the fact that photogenerated electrons accelerated the Fe(III)/Fe(II) and Cu(II)/Cu(I) conversion for the Fenton-like reaction between Fe(II)/Cu(I) and H₂O₂, thereby generating abundant ?OH for pollutant oxidation. Various environmental factors including H₂O₂ concentration, initial pH, catalyst dosage, TCH concentration and inorganic ions were explored. The reactive oxidation species (ROS) quenching results and electron spin resonance (ESR) spectra confirmed that ?O₂^? and ?OH were responsible for the dark and photo-Fenton-like systems, respectively. The degradation mechanisms and pathways of TCH were proposed, and the toxicity of products was evaluated. This work contributes a highly efficient and environmentally friendly catalyst and provides a clear mechanistic explanation for the removal of antibiotic pollutants in environmental remediation.     

北江中上游地表水和沉积物中PAHs和PCBs污染特征和风险评估

采用气相色谱-质谱法（GC-MS）测定了北江中上游流域地表水和沉积物样品中多环芳烃（PAHs）和多氯联苯（PCBs）类污染物的含量,分析了PAHs和PCBs的污染水平和空间分布,并评估了污染物的健康风险和生态风险.结果表明,16种PAHs单体在所有水样和沉积物样品中均被检出,检出范围分别为41.82~443.04 ng·L^-1和59.58~635.73 ng·g^-1,北江中上游PAHs的污染水平为中、轻度.水中PAHs以二环芳烃和三环芳烃为主,沉积物中以三环芳烃和四环芳烃为主.在水样中检出了17种PCBs,浓度范围0.81~287.50 ng·L^-1,以六氯联苯和七氯联苯为主;沉积物中检出了8种PCBs,含量范围0.13~3.96 ng·g^-1,以五氯联苯和七氯联苯为主.整个调查区域内地表水中PAHs和PCBs的终生致癌风险指数小于10^-4,处于中、低水平;非致癌风险指数均小于1,不存在非致癌风险.采用风险商值（RQ）法对地表水中污染物进行生态风险评价,研究区域内地表水中PAHs和PCBs生态风险总体处于中低风险水平,个别点位存在重度风险的污染物单体,值得引起重视.采用沉积物质量基准法（SQGs）对沉积物中污染物进行生态风险评估,沉积物中PAHs和PCBs均处于较低的生态风险水平.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

Bioaerosol emissions variations in large-scale landfill region and their health risk impacts

● The airborne bacteria in landfills were 4–50 times higher than fungi. ● Bioaerosols released from the working area would pose risk to on-site workers. ● The safe distance for the working area should be set as 80 m. Landfills are widely complained about due to the long-term odor and landfill gas emissions for local residents, while the bioaerosols are always neglected as another threat to on-site workers. In this study, bioaerosols samples were collected from the typical operation scenes in the large-scale modern landfill, and the emission levels of airborne bacteria, pathogenic species, and fungi were quantified and co-related. The corresponding exposure risks were assessed based on the average daily dose via inhalation and skin contact. It was found that the levels of culturable bacteria and fungi in all landfill samples were around 33–22778 CFU/m³ and 8–450 CFU/m³, and the active-working landfill area and the covered area were the maximum and minimum emission sources, respectively, meaning that the bioaerosols were mainly released from the areas related with the fresh waste operation. Acinetobacter sp., Massilia sp., Methylobacterium-Methylorubrum sp. and Noviherbaspirillum sp. were the main bacterial populations, with a percentage of 42.56%, 89.82%, 70.24% and 30.20% respectively in total bioaerosols measured. With regards to the health risk, the health risks via inhalation were the main potential risks, with four orders of magnitude higher than that of skin contact. Active-working area showed the critical point for non-carcinogenic risks, with a hazard quotient of 1.68, where 80 m protection distance is recommended for on-site worker protection, plus more careful protection measures.     

新疆大型工业园总体规划环评指标体系的建立与验证

基于我国工业园指标体系研究现状,归纳、统一了2002—2021年学者提出的8类99个指标,在此基础上总结了规划环评指标体系建立面临的困难。以X工业园为研究案例,结合理论分析,确定其制约因素是水资源数量和环境空气质量,并将制约因素纳入指标集。针对干旱区和大型工业园两个特点,建立了新疆大型工业园总体规划环评指标体系,并对其中4项需要严格要求的特色指标进行了说明。     

湟水河流域地表水体微塑料分布、风险及影响因素

为探究我国青藏高原淡水环境中微塑料的分布情况,采用金相显微镜观察、傅里叶红外光谱测定、野外调查和影像数据分析等方法对青海省湟水河流域丰水期63个地表水样中微塑料的分布特征和影响因素进行分析,并依据风险指数（H）和污染负荷（PLI）指数模型评估了微塑料的潜在生态风险.结果表明,流域水体中微塑料丰度范围为665~8780 n ·m^-3,湟源县水系平均丰度最高,达5414 n ·m^-3,各支流丰度从上游到下游逐渐增大.微塑料中薄膜类和颗粒类分别占36%和33%,透明和黑色分别占67%和17%,粒径在0.45~50 μm的占70%,聚乙烯（66%）和聚丙烯（12%）为主要的聚合物类型.微塑料丰度与耕地面积、降水量和紫外线强度正相关,与溶解氧、氧化还原电位和风速显著负相关,微塑料的分布受人类活动和环境因子的共同影响.总体上湟水河流域地表水体中微塑料的潜在生态风险较低.     

Planning for Biodiversity: the Role of Ecological Impact Assessment

Abstract:  Environmental impact assessment (EIA) is the process of identifying potential environmental effects of proposed development and the required mitigation measures. It is one of the most widely used planning tools today, but its ability to promote biodiversity conservation is largely unexplored. We studied the ecological component of the Israeli EIA system by reviewing a representative sample of 52 environmental impact statements (EISs) produced since 1995 and their corresponding guidelines issued by the Ministry of the Environment. Quality of both EISs and guidelines was determined using a simple scoring approach. Lack of quantitative data, meaningful analyses, and ecosystem perspective was apparent throughout. Many EISs failed to perform field surveys and their qualitative nature hampered meaningful impact prediction. Most EISs concentrated on aesthetic mitigation measures and did not assess their feasibility and likely success. Most of these flaws reflect poor standards rather than true scientific limitations. Guideline quality scores were the most important factor determining the quality of EISs; second was the involvement of an ecological consultant in preparing the EIS. We found a decreasing trend of EIS quality scores over time. Improvements in EIA procedures, particularly in ecological guidelines and the incorporation of ecological consultation, are important for upgrading ecological impact assessment so that the potential of EIA to advance biodiversity conservation can be realized.     

农产品环境安全评价及对策--以江苏省为例

在界定农产品环境安全含义的基础上，构建了由农产品环境安全压力、状况和保障能力组成的江苏农产品环境安全评价指标体系，采用主成分分析法和聚类分析法对全省13个市进行实证分析，并进一步对造成显著区域差异的原因进行了分析。提出了相应的对策建议。     

贫困地区可持续发展指标体系及其综合评估--以湖南湘西贫困地区为例

本文依据贫困地区可持续发展固有的制约因素，特殊的内涵与目标，首次利用压力（Pressure)——状态（State)——响应（Respons)模型，构建了贫困地区可持续发展指标体系，并采用专家咨询与定量模型相结合的方法，对湖南湘西贫困地区可持续发展水平作了实证评估与分析。